HURRY! BIG SALE Now On With 10% OFF (Use GET10) Order Now!

1020LM
Lumens
50,000
Life Hours
14.4W
Wattage
12v DC
Voltage
Orders Over £40 Ship Free

Orders Over £40 Ship Free

28 Day Returns

28 Day
Returns

5 Years* Warranty

5 Years*
Warranty

Need it sooner not later? Order it now and you'll receive it within 2-3 days within UK.
About Our Delivery Options.

9.24 £

Retail
Price
£9.24

SKU: MS605050RGB

Retail
Price
£9.24

In Stock

buy more pay less...

£7.60 Each

£7.50 Each

£7.40 Each

Can be cut every 5cm. Do you require any cuts/joins?

Maximum number of characters: 250

* Required Fields

Retail
Price
£9.24

Call To Order 0116 321 4120

Click Here For A Free Quote

Specification Table

Brand:
Mirrorstone
Chip:
5050
LEDs per Metre:
60
Lumens:
1020LM
Power:
14.4W
Equivalent Wattage:
80W
Input Voltage:
12v DC
Width (mm):
10
Length(mm):
1000
Height (mm):
2
Life Hours:
50,000
Beam Angle:
120°
Dimmable:
Dimmable
Colour:
RGB
Certification:
CE, RoHS
Warranty:
5 Years*

Spectric RGB Colour LED Strip Lights (60 x 5050 SMD, 14.4W, 330-1020 Lumens) Description

Create marvellous effects anywhere with the Mirrorstone 14.4w/m RGB LED strip light. Perfect for use in a wide range of domestic installations, commercial projects and design projects.

As LED strip lights have the properties to be installed nearly anywhere, they come with a self adhesive back so they can be stuck onto nearly any surface and location. Due to the wide range of surfaces that the LED Strip Lights are stuck to, we unfortunately cannot guarantee the adhesive on all surfaces. The strip lights are also able to be cut every 50mm so they can be shortened to very accurate lengths.

Our full range of 12v RGB LED strip lights are included in the special discount codes that are ran frequently. With these discount codes, you can save up to 20% off of your order before you've even installed the lights.

Introducing Spectric

The brand new Spectric line of LED strip lights will massively improve your lighting experience. These strip lights bring more vivid lighting, with a greater lumens to energy expenditure ratio than ever before. The life expectancy has been increased, with a whopping 50,000 hours of usage delivering a versatile light every single time.

Add Protection To Your LED Strips

Being as versatile as they are, internally and externally, all LED strip lights are available in a range of IP ratings (waterproofing) so they can be installed almost anywhere. A breakdown of these waterproofing options are listed in the table below:

IP Rating

General Installation

IP20

Having no protection against water, IP20 LED strip lights are advised to be installed internally as they have no protection against water.

IP65

With a small silicone coating that is capable of withstanding splashes and jets of water, IP65 LED strip lights are advised for internal installation in bathrooms or externally where water can't easily access them.

IP67

Surrounded by silicone, the IP67 LED strips are designed to be installed externally in garden feature and external displays.

IP68/IP68 Nano

Being the most resistant to water, the IP68 comes encased in silicone and the IP68 Nano has a layer of hydrophobic silicone. This makes the strip lights highly workable compared to standard IP68. Both can be submersed to depths of up to 10m. This makes them highly usable in bespoke places such as swimming pools.

Due to the silicone coating on them, IP65, IP67 and IP68 strip light are available in lengths of up to 5 metres. As the IP20 doesn't have any coating and the IP68 Nano has a extremely thin layer of hydrophobic silicone, they are available in lengths of up to 10 metres.

All LED Strip Lights are charged by the metre however, so when you're ordering your tape, you will need to specify the length you require, rounding up to the nearest metre.

Get Them Cut To Your Size, For Free!

Aforementioned, the strips have cutting points every 50mm. We are aware that not everyone has the means to cut and solder LED strip lights, so we offer a FREE cutting and soldering service on any LED strip lights purchased at Wholesale LED Lights. Above this, we can also extend the lengths of cable on the end of your RGB strips with RGB LED cables.

The same as the 14.4w/m single colour LED strip light, you can run up to 7.5m in one run of the strip lights.

All LED Tape is priced per metre. If you purchase any amount of LED strip lights then we will send it out as one full, uninterrupted length e.g. 1 x 3m rather than 3 x 1m.

Powering On The LED Strip Lights And Changing The Colour

The RGB LED strip lights run at 12 volts so they require a 12 volt power supply to function. We offer a range of transformers for use with the strips such as waterproof LED drivers and AC/DC power adapters.

These products come with RGB LEDs that can mix varying amount of Red, Green and Blue to achieve a spectrum of 16 colours including cool white. Our power supplies do not have the function to control colour so you will also need to purchase a RGB controller.

We sport a full range of controllers that can have either an Infrared or Radio Frequency receiver. The infrared controller requires a direct line of sight from the controller to change the colour and modes whereas the Radio Frequency controller does not require this direct line of sight and needs no directional input. These styles are the most used for domestic installation.

For large commercial installations we strongly recomend using zonal controllers combined with our DMX system, which offers significantly increased load capacity. These controllers function very similar to the more domestically used controllers but far surpass their maximum loads.

All of our controllers have a variety of options such as colour changing, mode setting and mode speeds.

Wholesale LED Lights recommends:

Change the colour of your RGB LED lights directly from your mobile phone! Wi-Fi RGB Controller for RGB colour LED strip lights Wi-Fi RGB Controller £73.57

These strip lights can be dimmed, however you will need to dim them from controller meaning you shouldn't purchase any of our dimmable LED drivers as the controller will then not operate.

Our power supplies have varying maximum loads to accommodate a whole multitude of lengths of strip. Our controllers have maximum loads starting from 72 watts so please factor this in when buying strip lights. Below is a list of notable lengths and their wattages in 14.4w/m RGB LED strips:

 1 Metre - 14.4 Watts;

 3 metres - 43.2 Watts;

5 metres - 72 Watts;

10 metres - 144 Watts;

15 Metres - 216 Watts.

With such products it is advised that you run about 10% under the maximum load of the power supply so it can manage its heat better, runs more efficiently which then maximises it's lifespan.

Amplifying The Life Of The LED Strips And Providing A Cleaner Look

LED strip lights come with an expected lifespan of up to 50,000 hours, which is nearly 15 years! This lifespan can fluctuate depending on the conditions which the strip lights are installed. In the table below, there are the three main conditions that affect the lifespan of the strip lights:

Favourable Conditions

Unfavourable Conditions

Cool air temperature surrounds the LED strips and/or has good ventilation.

Air around the LED strip is warm and does provide good ventilation.

Use IP Ratings when only necessary.

Use of IP Rating when unnecessary e.g. IP65 in where there no chance of water.

Having the strips mounted on a surface which can dissipate heat very effectively (e.g aluminium).

Strips that are mounted onto a surface which dissipate heat poorly (e.g. wood).

If all three of the favourable conditions are met, you can look at up to a 50% longer lifespan of 75,000 hours!

Helping with this extension, we sell aluminium profiles that are very effective at dissipating heat and in turn increasing the lifespan. On top of this life span extension, the aluminium profiles come with the option of having a clear or frosted diffuser to complete the full look.

IP65 LED strip lights that are mounted onto a surface that isn't an effective dissipater of heat, then they are not covered by any form of warranty. Replacements for these will then be charged at 50% of the retail price when purchased with aluminium profiles.

Extendable 5 Year Mirrorstone Warranty

Our full range of Mirrorstone manufactured LEDs and all of their related products come with a 2 year warranty. Above this, the full range of LED spotlights, LED light bulbs and LED tape can all be extended out to 5 years at no extra cost. This extended warranty can only be applied for and extended within the first 90 days of your order.

Installation Advice

We have a series of 'How To' videos available for you to watch on our YouTube channel to help with the installation of LED strip lights.

Also, if you are having problems wiring your LED RGB strip lights then please refer to the below wiring diagram.

Wiring your LED RGB strip lights diagram

If you purchase any amount of LED strip lights then we will send it out as one full, uninterrupted length e.g. 1 x 5m rather than 5 x 1m.

If you have any questions about the difference in our controllers, the extendable warranty, wholesale rates & trade enquiries or any other queries, please feel free to contact us by e-mail on cs@wled.co.uk or by telephone on 0116 321 4120.