Free shipping on orders over £50

Trade

Get Project Advice & A FREE Bespoke Strip Lights Quotation Here.

RGB LED Strip Light Kits

RGB LED Strip Light Kits

categorypagesalesbanner_1
We can't find products matching the selection.
categorypagesalesbanner_1

For ease of use, all-round performance and good old fashioned fun – you’d be hard pressed to do better than our amazing selection of RGB LED Strip Light Kits!

These Mirrorstone kits come packaged with everything you need straight out of the box to get going – that’s a plug and play power adapter, an IR controller and your choice length of RGB LED tape.

So all you need to do is plug everything in…and away you go!

One of the best things about this range of the sheer amount of variety on offer – let’s take a look at some of the options available to you here.

The most obvious thing you’ll have to decide is what length of tape you’d like. All the kits in this range come in either 1m, 2m, 3m, 4m or 5m lengths, depending on where you’re planning on using it.

You also get to choose how powerful you want your strips to be too – you can have either 7.2W per metre, or 14.4W per metre. This will then affect the brightness – 7.2W will give you a maximum 510 lumens, whilst the 14.4W doubles this to 1020 lumens.

Those who are looking to use their strips outside can also add IP65 rating protection to their tape, this allows it to withstand light jets of water from any direction, so you can use them in the kitchen, bathroom, or even outside!

Otherwise, the specs remain the same – light is distributed at a wide 120o beam angle, and can be dimmed using the supplied IR controller.

With a lifespan of 50,000 hours too, it’ll give you at least 15 years of use before they begin to fail.

The Professional Look

Alongside your kit, you may want to take a look at our selection of Aluminium profiles – not only do these help your strip lights look brilliant, but they also prolong the lifespan by up to 50% too, as they act as a heat sink for the warmth generated by the tape.

All the strip lights in this range are 10mm in width, and are therefore compatible with all the profiles that we sell. We would recommend one of our best sellers though – our 1m Classic Aluminium Profile.

To take your setup to the next level, you can also have a diffuser bundled with the profile – you can take your pick from either clear or frosted, with options for clip-in or slide-in installation too.

Buy With Confidence

You can rest assured that when you buy any of our RGB LED Strip Light Kits from us, your purchase is protected from both us, and the manufacturer.

We have a 14-day cancellation period in place which allows you to return your kit if you’ve changed your mind. Please be aware though that we cannot accept returns on any tape that has been altered or cut down to length.

Mirrorstone will also cover you with their 2 year replacement warranty should anything go wrong, though reliability is so high on our tape, this is an unlikely scenario.

If you want to speak to us, simply give us a call on 0116 321 4120, send us an email to cs@wled.co.uk, or use our Facebook and Twitter pages, and our customer services team can answer any queries you might have.