Running long lengths of RGB LED strip light? Then look no further than the RGB Amplifier, made by Mirrorstone. Designed specifically for use with long lengths of LED tape, it can connect up to any of our RGB LED controllers and increase its range by a further 5-10m, dependant on the strip light being ran from it.

Being controllable at both 12v and 24v it can be ran with any RGB strip that we sell.

Simply connect your strip lights up to the controller as you normally would, but then for the amplifier, run a length of 4 core cable from the controller to the amplifier and that give you the option of running even more strip!

Getting The Right Effects

Despite not being directly controllable, the RGB Amplifier mimics what mode, setting or colour is set by the controller that it is connected to. All it needs get from the controller is it's signal and it can control its own length of LED strip. This means even though our controller can already do up to 288W worth of strip light, with their own power supplies you can have near unlimited lengths from one controller!

Higher end controllers such as our RGB Colour Touch Controller, RGB Wi-Fi Controller and Smart Wireless Wall Plate with Remote have a up to 9 different modes and settings to choose from with one even being controllable from your Smartphone!

Featuring a maximum load of 72W there is a limit that each amplifier can do and there isn't a standard length as we have a range of different powers in our RGB LED strips. The optimum length to run from one amplifier is 5m, but list below categorises how much of each strip can be done from one amplifier:

• 12v 7.2w/m RGB LED Strip - 10m;
• 12v 14.4w/m RGB LED Tape - 5m;
• 24v 14.4w/m RGB Strip Light - 5m.

You don't have to run these exact lengths however, as we offer a bespoke cutting and soldering service meaning that you can get custom lengths of LED Strip to suit you exactly.

Making Sure Your Units Are Protected

Even though the ranges of LED strip have varying IP ratings, the RGB Amplifier, does not and it is solely IP20 rated. This rating means that installation where there could be water is not advisable as there is no water protection.

Solid objects of 12mm or wider are however, protected against stopping any fingers or other body parts from entering the insides and causing potential harm.

Start Your LED Renovation With HUGE Savings

Every order you place that is over the value of £40 comes with the option for free delivery at 2-3 days. Simply choose the 'Free Delivery' option at the checkout to start your savings off. 

Make the largest savings with one of the discounts from our whole collection of beneficial discount codes. These can help you save up to 20% on your order amount, meaning that you're saving money before your LEDs are even installed!

You can even make larger savings if you are in the trade! Simply apply for an account and reap the rewards!

What About Any Issues You May Have?

We doubt you will come across any issues, but if you ever do we're always here to help you out. With each RGB Amplifier coming with a 2 year warranty, you are covered against any failed units with free of charge replacements!

Not only that but if you are unsure on whether or not the product is right for you, we give you 14 days to decide. If you are still not 100% happy let us know and we can arrange a refund or swap over to something of the same value, even if it's LED bulbs or LED spotlights that you wish to swap over to.

If you have any questions about the RGB Amplifier or any of our LED controllers then feel free to get in touch with us by calling 0116 321 4120 or by sending an e-mail to cs@wled.co.uk.