HURRY! SPECIAL SALE Now On With 10% OFF (Use MEGA10) Order Now!

Product Gallery
IP Rating
240v AC
Maximum Load
Orders Over £40 Ship Free

Orders Over £40 Ship Free

28 Day Returns

28 Day

2 Years Warranty

2 Years

43.34 £


SKU: MS-72


In Stock

* Required Fields


Call To Order 0116 321 4120

Specification Table

Constant Voltage
6A/3A (12V/24V)
Maximum Load:
Minimum Load:
Input Voltage:
240v AC
Output Voltage:
12V/24V DC
IP Rating:
Width (mm):
Height (mm):
2 Years

X-Power 60W LED Driver Description

If you’re looking to power your low voltage LEDs then look no further – our 60W LED Driver does the job perfectly.

Brought to you by Mirrorstone Lighting, this driver can take a maximum load of up to 60W, making it ideal for powering lengths of LED strip light.

The 240V AC input ensures it can connect directly to your mains. It then converts this to either 12V or 24V DC depending on your choice and requirements.

Its small size makes it practical too, coming in at just 160 x 95 x 40mm.

You can save some money on this LED driver, as it ships for free.

Further savings are available through our discount codes as well. We run various offers throughout the year that could give you up to 20% off selected items, so be sure to check back for the latest deals.

Introducing X-Power

The powerful X-Power range of LED drivers delivers some excellent transformation, with the ultimate efficiency. The fan has been upgraded, for quieter running and increased lifespans. The size has also been reduced, leaving a sleeker, quieter, cooler driver to supply your lower-voltage lighting.

Making The Most of Your Driver

Although you can use your driver to power any LED light that requires a transformer, strip lights really benefit from this product.

You can use this driver with any of our LED tape, though if you do want to use RGB colour strips with it, you will need to connect it through a controller. All other types of LED tape can connect directly to this 60W driver.

A great option for keeping it simple would be our 7.2W Single Colour LED Strip Light. It offers good overall performance with 510 lumens of brightness coming at just 7.2W/m of energy consumption.

A range of colours are available, from warm white (3000K) and cool white (6000K), to red, green and blue.

It can be cut to custom lengths at 10cm intervals. It is important to note though that we cannot accept returns on custom lengths of strip light under any circumstances, so please ensure you measurements are correct before ordering your items.

Bearing in mind the maximum load of 60W on our featured driver, you can run lengths of up to 9m of this single colour tape with this transformer.

If you already know what kind of lights you need to power, then you may need a different driver depending on the wattage of the lights.

If 60W is either too excessive or not enough, we have alternatives for you to consider. For simple bulbs or spotlights, you may want to look at either our 6W LED Driver or our 24W Driver.

If you’re running longer lengths of strip light for example though, you may need something with a much higher capacity.

For this, you should consider our 150W Driver. You could run up to 18m of the single colour strip light we mentioned earlier with this transformer, giving you far greater freedom as far as your lengths are concerned.

Please have a look through our whole range of power supplies to make sure you have the right product for your needs. Over there you can find a huge selection of power adapters, standard, dimmable, waterproof, 1-10v and Dali drivers.

Warranty, Returns And Contact Info

If you find yourself in a position where you need to return your 60W LED driver for any reason, you’re fully entitled to a refund or exchange at any point during our 28 day home trial period.

You also get a 2 year warranty with this item too, covering you beyond the initial 28 days.

You can send us an email at, or give us a ring on 0116 321 4120 if you have any further questions about this driver, installations, wholesale orders or anything else.