Download the spec sheet for the X-Power 150W LED Driver here.

If you are looking to install any low Voltage LEDs, make sure you get the right power to them with the 150W LED Driver. Featuring a perforated steel casing it can maintain its heat exceptionally well and doesn't have the need for a cooling system like a fan or water cooling.

It is also fully CE & RoHS certified meaning that it can be installed in a wide range of areas across the home without bringing you any risk. It is however only IP20 rated meaning that bathroom installation is prohibited.

Introducing X-Power

The powerful X-Power range of LED drivers delivers some excellent transformation, with the ultimate efficiency. The fan has been upgraded, for quieter running and increased lifespans. The size has also been reduced, leaving a sleeker, quieter, cooler driver to supply your lower-voltage lighting.

Running A Suitable Length

As it is available in either a 12v or 24v voltage output any of the LED strip lights that we sell can be connected up. There is however such a huge range of wattages and brightness' available for to chose from, meaning that there is no standard length that can be ran from one driver. The list below compiles standard power outputs of LED strips and the length that can be ran the driver:

• 4.8w/m Single Colour LED Tape - 30m;
• 7.2w/m RGB Pixel Tape - 20m;
• 9.6w/m Single Colour LED Strip Light - 15m;
• 14.4w/m RGBW Strip - 10m;
• 5w/m Single Colour Side Emitting LED Strip - 30m;
• 24v 14.4w/m RGB LED Tape - 10m.

You're not just limited to strip lights with the 150W LED Driver though, as the controllers for them are also 12v meaning that all RGB, single, dual and Pixel controllers use a 12v-24v DC power. Our DMX decoders are also low voltage, meaning that they can also be used.

LED Strips are not the only usable product with our LED drivers as we have a range of low voltage LED spotlights that can also benefit from them.

Despite such a range of products being able to be used with it, the 150W LED Driver is non-dimmable, meaning that you cannot install a dimmer switch with it. The lights won't just not dim, but they will also potentially be damaged, voiding the warranty on both the driver and the connected LEDs.

This is just one of many drivers in the range we stock, with all different power supplies such as AC/DC Power adapters, other LED drivers like this one, IP67 rated drivers for wet applications, drivers specifically for dimming from a switch, 1-10v dimmable drivers and specific DALI dimmable drivers.

Effortless Light Covered For 2 Years

As buying online is a bit of an uncertainty until you have the item, or you have simply changed your mind on the order then get in touch and we can arrange a refund or exchange as long as you're inside the first 14 days of your order.

Each 150W Driver also comes with 2 year manufacturer's warranty, meaning that any failures are covered with cost free replacements.

For any more information on the 150W LED Driver or other drivers we have available then please feel free to get in touch with us by calling 0116 321 4120 or send an e-mail to cs@wled.co.uk.