Light up large areas such as car parks with the Mirrorstone 70W LED Floodlight. Consuming just 70 watts of power and being LED you will be able to replace your 700W low pressure Sodium or metal halide floodlight without losing any light effect. It is also IP65 rated as standard allowing it to be mounted outside and not have any issues with any potential water penetration into the unit.
Coming with all standard 240V connections and mounting brackets makes it a direct replacement for your current floodlight and helps make savings of up to 90% straight away.
Keep your home safe with the ultimate in private property protection. The ProSaferange from Mirrorstone Lighting has a tough build quality to separate it as a leader in the floodlight category. A fantastic energy-efficiency means more lumens to watts to truly light up your property. You cannot put a price on security for your premises, but the ProSafe price range stays low.
Seamlessly Swap Your Floodlight To LED And Make Savings Instantly
As with all of our standard LED floodlights, the 70W LED Floodlight is available in three different finishes of White, Black and Grey. Alongside these three finishes, you have the selection the two colour options of Warm White (3000K) and Cool White (6000K).
For a replacement LED floodlight to replicate traditional halogen colours then Warm White would be the better to colour select. If, however, colour isn't too much of an issue, and you are looking to illuminate as much as possible then it may be worthwhile selecting Cool White (6000K) thanks to its bright white output.
A faulty or failed floodlight means the need for a replacement. Being such an arduous task, you will want to replace your floodlights as a minimal as possible. The Mirrorstone 70W LED Floodlight is the perfect replacement for any floodlight of equivalent brightness, with an estimated lifespan over 10 years meaning the frequent replacements are a thing of the past.
The economical power consumption of all of our LED floodlights means that you can make savings of up to 90% on your lighting bills. This, along with the long lifespan, means you can make huge savings for a huge amount of time making it one of the easiest purchases you'll ever make.
Detect Motion To Only Use The Lights When Necessary
All of the standard floodlights available are compatible with our full range of PIR Motion Sensors. These sensors detect any movement made within its detection range and then switch any connected light on. This can help illuminate areas where only need to be, for example where a car is driving in a car park or to deter any potential criminal activity.
These motion sensors can also help keep the costs to a minimum by only switching the lights on when necessary. There is also a range of PIR integrated LED floodlights available if you would like to install a floodlight with an individual PIR motion sensor.
Cancellation Period And 24 Month Replacements
LED floodlights all come with a range of options, so we appreciate it may be difficult to get exactly what you are looking for first time and you may want to change over to something else. If you don't feel fully satisfied with your purchase then let us know and we will cancel it for you within 14-days of receipt. Please be informed that, as a special-order item, this fitting is subject to a 15% restocking fee.
We are also aware that despite the exceptional reliability of the Mirrorstone Lighting products, electrical items are liable to fail on rare occasions so we offer a free replacement warranty for 24 months after the date of purchase.
If you have any questions on the range of available floodlights, or if you need advice on the colour of light to choose or for any advice on your installation as well as any enquiries for trade prices then get in touch by calling us on 0116 321 4120 or e-mail email@example.com for more info.
The item supplied was not the same as pictured on the web site and appears quite different to the one advertised. Also, the carton was labelled as 70 Watts, which is what was ordered, but the item in the box was screen printed 80 Watts under the full front glass panel.
The item supplied has no junction box below the light, but is 1 sealed unit with a short flex, so it needs to be connected to a junction box close to the installation point and cannot terminate an existing cable connection when replacing an old floodlight fitting with connection terminals.
Despite this, I am very pleased with the item as none of this was a problem in my case. I presumably have a few more lumens of illumination for my money.
The item is quite heavy and has a standard tilt bracket but no swivel. I needed to buy a separate purpose made heavy duty bracket with swivel adjustment, which I had planned to do anyhow. The existing power cable that I had needed to be terminated in an exterior grade junction box, which also terminated the short flex from the LED floodlight. This was located beside the wall plate of the mounting bracket. You need to plan this carefully to ensure that the flex will reach.
This all worked well and the unit gives a good cold light (I chose daylight colour option) over the area that I required, which was around 120 degrees x 10 metres from a 5 m above ground installation position.
The instructions provided were wholly inadequate and incomprehensible English, but the unit is pretty solidly made and only has a standard flex to connect, so a competent electrician should have no problem.
I have only just installed the unit, but it looks tidy and I hope it will last a long time.
I have used this light as a replacement for a halogen floodlight in a barn. As it is very high up, I wanted to avoid the frequent tube replacement. In addition, I wanted the light to operate at a lower temperature (fire risk) and to be cheaper to operate. I am very happy with this LED floodlight which meets all my requirements.
Great lights, could do with the flex being slightly longer! Other than that great!
This is a solid well built floodlight. The 70w warm white replaced an old 500w halogen light, the light is obviously brighter than the old Halogen as equivalent to 700 watt halogen bulb (50w Led equates to 500 watt halogen). Note you will need an external junction box to go with this as no internal junction in floodlight.
I did think the mounting bracket could have been made from a heavier gauge steel as the floodlight is quite heavy although no problems so far. I would buy this again.
R and C Ward
Overall a good product, competitively priced. Mounting brackets are a little weak.
These lights were fitted inside a church ,comments were very good.When finance is available again we hope to install more fittings.This will also give the church a saving on the electric bills.certainly look good and work well for us.
Very pleased with the service,
Fitted light on Saturday and great very bright it does exactly what I wanted it to do
Replaced a 300w and just as bright, use you again
Well done A++++++++
Brilliant for the car park I'm using to light up! Super bright!
If you would like to return anything you have bought from Wholesale LED Lights, you have 14 days from the date of delivery to notify us. Should you with to, you then have a further 14 days to send the item back to us. You will then receive either a refund or an exchange.
This applies to all items unless otherwise stated, for example, any custom-made items (such as cut to length LED Strip Lights, or LED Door Signs) are excluded from our 14 day returns policy.
If an item has been modified, attempted to have been repaired or otherwise tampered with, Wholesale LED Lights are not obliged to offer a refund or exchange.