Add some great effects to your home with single colour LED strip lights manufactured by Mirrorstone. Perfect for use in under plinth and shelving lighting, the 4.8w LED strip light is perfect for achieving your desired effect.
Each fully flexible strip has a self-adhesive 3M backing so you can stick it directly onto the surface you're looking to install it on. However, please note that the IP67 LED Tape does not come with the 3M Adhesive. They can also be cut down to every 50mm making it very simple to get the strips down to a size that you need. Due to the wide range of surfaces that the LED Strip Lights are stuck to, we unfortunately cannot guarantee the adhesive on all surfaces.
Did you know that all of our LED Tape is dimmable? Simply use alongside a dimmable driver to alter the brightness!
Please note that all IP67 and IP68 tape comes in lengths of up to 5m max, and will not fit in any of our aluminium profiles.
IP65 tape comes in maximum lengths of up to 25m, and will be soldered tape to tape every 5m for any lengths over 5m. Although 25m lengths are available in this way, there is no guarantee that it can be ran continuously due to power drop. Please get in touch with us if you require further information about this.
IP20 tape may or may not come soldered tape to tape, as this depends on how it arrives to us from our suppliers.
Find further information on Strip Lights on our FAQs page.
These strips are applicable to the discount codes that are frequently ran on our site, so you can make savings of up to 20%.
The brand new Spectricline of LED strip lights will massively improve your lighting experience. These strip lights bring more vivid lighting, with a greater lumens to energy expenditure ratio than ever before. The life expectancy has been increased, with a whopping 50,000 hours of usage delivering a versatile light every single time.
Where To Put Your New LED Strip Lights & IP Ratings
LED Strip Lights come in varying powers and brightness levels, usable in a range of applications. The 4.8w/m LED strip is our lowest power LED strip is very useful for a range of effect lighting installations. The strip is available in a full range of waterproofing options (IP Ratings) that are suitable for a full range external and internal installations.
The IP ratings and the general usage for them is in the table below.
Main usage of IP20 is under plinth and cabinet light as well as general backlighting. It is also usable for kitchen applications.
IP65 is a splashproof strip and is mainly used in bathroom installations to protect the strip from steam. IP65 can also be used in the kitchen to protect the strip from and steam from cooking or a kettle.
Used in outdoor installations such as water features and external lighting.
General usage is in swimming pools, ponds etc. at depths of up to 1.5m.
Whilst the IP20 Strips and IP68 Nano are available in 10 metre reels, our IP65, IP67 and IP68 strips are available in 5 metre reels.
Along with the IP Ratings of the LED Strips, the colour of them is also a large factor as to where you will need to put them. The strip lights are available in a variety of colours but Warm White (3000K) and Cool White (6000K) are the most popular colours.
Warm White is mainly used in traditionally styled rooms and is also used heavily in living rooms and bedrooms, Cool White however is used in rooms with a more modern flair to it as well as kitchens and bathrooms where more light is required.
Bespoke Cutting Service And Maximum Lengths Of Strip
Here at Wholesale LED Lights we offer a bespoke, cut to length service and are the only LED lighting company in the UK to do so. The 4.8w/m Single Colour LED strip light can be cut every 50mm (5cm). We offer up to three cuts free of charge. If you would rather cut the LED strips yourself so you can get exact lengths or don't know the lengths you need yet then you can do that as well.
Our LED strip lights run at 12 volts so are prone to voltage drop after a certain length. Voltage drop is where LED strips lose power after a certain linear meterage. The lengths vary by strip and cannot be lengthened by using a more powerful power supply.
Power supplies also come in a range of powers to accommodate for longer lengths of strips. For example, our LED drivers range in powers from 6w all the way up to 240w. We have prepared a list below so you can get an idea of the power you'll need:
■ 1 Metre - 4.8 Watts;
■ 3 Metres - 14.4 Watts;
■ 5 Metres - 24 Watts;
■ 10 Metres - 48 Watts;
■ 20 Metres - 96 Watts;
■ 45 Metres - 216 Watts.
Please note that when selecting power supplies for your LED Strip Lights it is advised that you should leave around 10% load on your power supply to maximise the efficiency, heat management and lifespan.
Managing The Lifespan And Providing The Finishing Touches
Our LED Strip Lights all come with a life expectancy of 50,000 hours which equates to over a decade! This lifespan can be changed dependant on the a range of external such as factors. The main factors that influence lifespan change in LED Strips is the temperature where is it mounted, the IP Rating and the surface where the strips are mounted.
Cool air temperature surrounding the LED strip lights.
Warm air around the strip and in the room.
Mounted on a surface that dissipates the heat efficiently.
Mounted onto a surface that struggles to dissipate heat efficiently (e.g. wood).
Using IP rating only where necessary.
Excessive use of IP ratings where unnecessary.
If the strip lights are mounted in all favourable conditions then you are looking up to a 50% extended lifespan of 75,000 hours!
Please note that IP65 strip lights that are fitted internally without aluminium profiles are not covered by the 2 year warranty. Replacements will be charged at 50% of the retail price when bought with aluminium profiles.
Adding Depth To Your Installation With Dimming Functionality
Our full range of single colour 12 volt and single colour 24 volt strip lights come with the option of being dimmable. This is achievable by one of two ways, either via mains voltage dimming or low voltage.
Mains dimming is as it sounds and is the most popular form of dimming LEDs. To mains dim your LED strip lights, you will need a compatible LED dimmer switch and a dimmable LED driver. This will then allow for you to dim the strip lights from a wall mounted dimmer switch.
You can also dim the strips by low voltage. Low voltage dimming doesn't require a wall mounted dimmer switch and is generally used with a handheld remote. For low voltage dimming, you will need to install an LED driver or power adapter and a single colour dimmer.
If you have any queries about the lengths of tape, our cutting and soldering service, dimming LEDs strip lights, our wholesale rates & trade offers or anything else then please feel free to get in contact us with either by e-mail at email@example.com or by telephone on 0116 321 4120.
If you would like to return anything you have bought from Wholesale LED Lights, you have 14 days from the date of delivery to notify us. Should you with to, you then have a further 14 days to send the item back to us. You will then receive either a refund or an exchange.
This applies to all items unless otherwise stated, for example, any custom-made items (such as cut to length LED Strip Lights, or LED Door Signs) are excluded from our 14 day returns policy.
If an item has been modified, attempted to have been repaired or otherwise tampered with, Wholesale LED Lights are not obliged to offer a refund or exchange.