Make your garden a prominent feature of your house by incorporating the Medlock Stainless Steel Wall Light with PIR. Coming with an impeccable Satin Chrome finish, it can fit right in with your external decor making it perfect anywhere in around your home.
Although being capable of a 60w Incandescent, the benefits of LED bulbs don't stop at just the savings as unlike other less energy efficient bulbs, they don't contain any harmful materials such as mercury. LEDs are also fully recyclable, meaning that they are also a lot better for the environment compared to their older cousins.
As it is designed for outdoor use, the Medlock Stainless Steel Wall Light with PIR comes with an IP44 rating to protect it from a range of weather conditions from Rain to Snow and everything in between whilst still operating as if it were new.
Unlike all outdoor fittings, the Medlock Stainless Steel features an integrated PIR Motion detection unit that allows for the light to be switched automatically when detected. This PIR helps you light up where you need to, when you need to and never any time else.
EasiLight: A World Of Colour In Your Hands
Add some colour to your garden with our exclusive EasiLight RGB bulbs. Compatible with selected fittings, simply pop in the bulb and control using a remote – gone are the days of switches.
Innovate your home’s exterior with this smart technology and control your lighting from the push of a button. This intelligent range can emit up to 16 million colours using Wi-Fi, dim or brighten to your chosen aesthetic and can even be paired with your Amazon Alexa smart-home device. Still with the low cost, tough durability and long life-span of LEDs, have the added bonus of wowing your guests with this truly unique and mesmerising lighting.
Connect your bulb with Wi-Fi Bridge Box to control the speed, brightness and other bulb functions via your smartphone, or opt for a 4 Zone Wallplate when you have multiple bulbs to control. Don’t forget to purchase your Remote Holder to ensure it never escapes. For more options, simply search ‘Easilight’ in our search bar for the entire range!
Please note that when purchasing the RGB bulbs with this fitting, you will need a minimum of one remote to control your bulbs. So, if you’re purchasing a single fitting, you will need to pick the option with remote, whereas if you’re purchasing multiple fittings, only one of them needs to be purchased with a remote.
Finding The Best Bulb For You
As previously mentioned, this unit will take standard E27 light bulbs with a maximum load of up to 60w so any E27 LED can be installed without the fear of overloading and damaging the unit.
We can also help you with your choice by giving you the option of purchasing an E27 60SMD LED Globe with every single fitting, which has a life expectancy of 50,000 hours which equates to roughly 15 whole years!
Not only is there a wide range of dimmable bulbs available to use within the fitting but they all are available in two colour options of Warm White (3000K) or Cool White (6000K) meaning you can find the effect you'd like effortlessly.
A Wide Range Of Offers And Savings Available
Like all of the decorative outdoor light fittings available at Wholesale LED Lights, the Medlock Stainless Steel Wall Light with PIR comes with a 12 month replacement warranty covering you for any failures you have within the first year of use. This isn't the only warranty that is available however as all of the light bulbs that can be installed also come with a 2 year warranty as standard, upgradable to 5 years free of charge!
As well as these exceptional warranties, any orders over £40 also has the option of being shipped for free.
If you have any questions in regards to the range of ornamental outdoor lights, the bulbs which are compatible with them as well as any enquiries for trade accounts on our trade website then get through to us by e-mailing firstname.lastname@example.org or by calling on 0116 321 4120.
They look absolutely stunning! And work perfectly!
The Medlock with PIR is basically a diffused light, plastic box, with a stainless steel plate in front of it. Light will shine through the rear of the box and light the wall it is mounted on, as well as through the slots cut in the steel front plate. I fitted mine with an E27 Omni Globe LED 6W bulb (warm white 3000K). I fitted two of these one either side of the double garage door and they give off enough light to see by when on, but not so much that it's in your face like a halogen 500W or 400W would be. The plastic box has six screws with a plastic lid with rubber seal, beneath the stainless steel plate, remove the plate to get to the plastic box lid and to fit the electrics. Inside the box is an E27 lamp holder with a chocolate block terminal for the connection of Live and Neutral. The lamp holder can be mounted in two positions higher or lower in the box (comes fitted in the lower position). There is no earth connection as such. The PIR is mounted in the lid of the plastic box and has a thin cable connected to the controller box for the PIR. The controller box has DIP switches for the amount of time on and is marked on the controller with different timings. They come set with the 1 minute DIP switch on and I found this OK for my purposes. The PIR controller block is approx 45mm x 20mm x 15mm and is stuck to the inside of the plastic box with double sided tape. There is not too much room left to fit the incoming electric cable, with enters through a rubber grommet in the rear bottom left of the plastic box and goes beneath the lamp holder to the bottom right rear of the plastic box where the chocolate block terminal is mounted. The chocolate block terminal comes off it's mounting pins easily to allow better access for connecting the cable. I found the controller box was loose in one of my units so it was easier to fit the cable and secure the controller box after. If you have some double sided tape you may find it easier to remove the controller box to allow better access. The connections and wiring from the chocolate block terminals to the lamp holder and controller box are already fitted. The thin cable to the PIR sensor is fragile and not excessively long so bear this in mind when removing the plastic box lid as the weight of the lid can damage the cable if you are not careful.
Overall I am happy with these lights and thought the cost was worth it as well as receiving the usual good service of wholesaleledlights. The only downside is that the thin cable because of it's shortness tends to end up in the plastic box close to the lid and you can see it's shadow when the light is on. Looks like I will have to dismantle them again to use some cable ties to keep them back from being seen and maybe mount the controller box nearer the bottom of the plastic box. I'm telling you this so you don't make the same mistake when fitting and to save you an extra job. One of my lights also came with two mounting screws missing, but I managed to find some suitable replacements in my tool box. So 4 stars from me because of the lack of instructions for the controller box and missing screws, but you do get fitting instructions.
If you would like to return anything you have bought from Wholesale LED Lights, you have 14 days from the date of delivery to notify us. Should you with to, you then have a further 14 days to send the item back to us. You will then receive either a refund or an exchange.
This applies to all items unless otherwise stated, for example, any custom-made items (such as cut to length LED Strip Lights, or LED Door Signs) are excluded from our 14 day returns policy.
If an item has been modified, attempted to have been repaired or otherwise tampered with, Wholesale LED Lights are not obliged to offer a refund or exchange.